SkullandBonesSkateboards.com Forum Index
FAQ   Search   Memberlist   Usergroups  
Log in   Register
Loading...
Username:   Password:
SkullandBonesSkateboards.com Forum Index  »  SCREEN PRINTING  »  Exposing a curved screen?
 Post new topic   Reply to topic
Page 1 of 1    

Exposing a curved screen?
Author Message
streetlight
Posted: Tue Jul 20, 2010 9:30 am Reply with quote
Joined: 09 Jul 2010 Posts: 5
I am planning on making a screen with a slight curve in it. Approx 1.5 in over a length of 4 feet. I understand the importance of keeping the film positive tight against the screen during exposure, but how can this be achieved with a curved screen? is it possible to burn the image in first then stretch the mesh to its frame?

Thanks
Back to top View user's profile Send private message
hank1113
Posted: Tue Jul 20, 2010 9:43 am Reply with quote
Joined: 30 Apr 2009 Posts: 3639 Location: Richmond Va
build a curved exposure unit... use Plexiglas in lieu of glass.. might work...

_________________
www.shipyardskates.com
Back to top View user's profile Send private message
streetlight
Posted: Tue Jul 20, 2010 10:05 am Reply with quote
Joined: 09 Jul 2010 Posts: 5
that's a possible solution...how do all you people who make screens like this do it?
http://skullandbonesskateboards.com/f...topic.php?t=75976
Back to top View user's profile Send private message
streetlight
Posted: Thu Jul 22, 2010 11:31 am Reply with quote
Joined: 09 Jul 2010 Posts: 5
Ok I read up on this more and according to donald20 you can use a spray adhesive to glue the film to the screen during exposure and it will wash off with water later. Could anyone tell me the best kind of spray adhesive to use?
Back to top View user's profile Send private message
mkelty
Posted: Thu Jul 22, 2010 11:43 am Reply with quote
ORDER OF THE SKULL ORDER OF THE SKULL
 Joined: 06 Oct 2006 Posts: 3644 Location: Springfield, OR
3m makes a repositionable Stencil adhesive that would probably work well, just be sure you spray it on lightly enough to not interfere with your exposure. Spray the neg, not the screen, and let it sit for a few minutes before you apply it.

_________________
ThankGodI'veGottaJobThankGodI'veGottaJobThankGodI'veGottaJob
Back to top View user's profile Send private message
streetlight
Posted: Thu Jul 22, 2010 11:48 am Reply with quote
Joined: 09 Jul 2010 Posts: 5
ok great thanks for the tips!
Back to top View user's profile Send private message
Jigzaw Sequence
Posted: Mon Jul 26, 2010 3:02 pm Reply with quote
ORDER OF THE SKULL ORDER OF THE SKULL
 Joined: 02 Dec 2008 Posts: 280 Location: southern california
vacuum bag and some scotch tape. works the best with little on no distortion.
Back to top View user's profile Send private message
 
    Display posts from previous:  
Post new topic   Reply to topic
Page 1 of 1    
All times are GMT - 5 Hours
The time now is Wed Apr 24, 2024 6:38 pm
SkullandBonesSkateboards.com Forum Index  »  SCREEN PRINTING
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum