| SkullandBonesSkateboards.com Forum Index » SCREEN PRINTING » Sublimated questions... |
|
Page 1 of 1 |
|
| Author |
Message |
| Sk8kid83 |
 Posted: Tue Sep 30, 2003 12:14 pm |
 |
|
|
Joined: 29 Sep 2003
Posts: 7
Location: Colorado
|
Does anyone know exactly what sublimated heat transfers are, and if it can be done by someone who is working out of a home shop? I am interested in started printing on boards, but I have heard alot about sublimation, but I still don't know what exactly it is...
[ This Message was edited by: Sk8kid83 on 2003-09-30 13:15 ] |
|
|
| Back to top |
  
|
|
|
| Steven |
| Posted: Thu Oct 02, 2003 4:20 am |
|
|
|
Joined: 25 Sep 2003
Posts: 9
Location: belgium
|
Hi
Most major skateboard manufacturers use sublimation to apply graphics to their boards. This procedure is a lot easier than traditional screen printing. You use a pecial sheet of transfer paper that is printed on with sublimation ink, The paper is the same size as a board, The board, with the transfer paper on top is placed in a heat transfer press, the graphic sticks to the board and the back of the transfer paper just peels off. It's very quick and easy, you do not have to worry about different screens for different colors or spiling ink. The only disadvantage is that the heat press is very expensive and has to be custom-made.
Check the internet for geo knight presses |
|
|
| Back to top |
|
| Stranglehold77 |
| Posted: Thu Oct 02, 2003 8:56 am |
|
|
ORDER OF THE SKULL
Joined: 10 Apr 2002
Posts: 5428
Location: Victoria BC CANADA
|
| Yeah, I've never heard of anyone doing sublimation at home. Too much $$$ involved. |
|
|
| Back to top |
 
|
|
|
| Sk8kid83 |
| Posted: Thu Oct 02, 2003 11:56 am |
|
|
|
Joined: 29 Sep 2003
Posts: 7
Location: Colorado
|
I was just doing some checking online for te geo knight presses, I found the actual geo knight web site, but I am confused as to what exact type of press I would need, they make a whole line of presses, some for as cheap as $300, but I don't know if that would work. I also wondered if you knew whether or not most companies are transfering their graphics before pressing, or after?
http://www.heatpress.com/
This is where I found the presses. |
|
|
| Back to top |
|
| livi-skater |
| Posted: Fri Oct 03, 2003 7:05 am |
|
|
|
Joined: 07 Mar 2003
Posts: 236
Location: Scotland
|
| I'm no expert but im pretty sure they are heat presses like the web address says. They are used for doing heat tansfers to clothing not pressing 2000psi on wood. |
|
|
| Back to top |
|
| Steven |
| Posted: Fri Oct 03, 2003 1:37 pm |
|
|
|
Joined: 25 Sep 2003
Posts: 9
Location: belgium
|
Unfortunately, the press you need for skateboards is the most expensive one on the geo knight website, plus, i think it has to be customized, i'm not sure however, I do know that several bigger companies use this type of machine, e.g. Madrid skateboards.
I think decks are presed first, then graphics are pressed onto the board. |
|
|
| Back to top |
|
|
|
| XTBUGFIEND |
| Posted: Tue Sep 16, 2014 2:14 pm |
|
|
|
Joined: 16 Sep 2014
Posts: 2
Location: Perth, Western Australia
|
Hey guys. I tried to put a sublimation print on a deck using a heat press at home which had a flat heat platen.
BAD out come.
With the board remaining stationary and heat and pressure applied, the glue softened and the board delamed and split.
The big ones companies use have heated rollers that the board goes forward and back thru.
Don't try this at home, trust me, I've done it so you don't have to |
|
|
| Back to top |
|
| oneendone |
| Posted: Tue Sep 16, 2014 9:23 pm |
|
|
ORDER OF THE SKULL
Joined: 03 Jan 2010
Posts: 3176
Location: backwoods
|
| . |
_________________
Wanted: Nos white dip Santa Cruz Special Edition Mechanical Fish |
|
| Back to top |
|
|
