SkullandBonesSkateboards.com Forum Index
SkullandBonesSkateboards.com Forum Index  »  HOT DISCUSSIONS  »  How to remove rusted spacers off of truck hangers?
 Post new topic   Reply to topic
Page 1 of 1    

How to remove rusted spacers off of truck hangers?

Author Message
radrob
Posted: Wed Jan 09, 2019 6:29 pm Reply with quote
ORDER OF THE SKULL ORDER OF THE SKULL
Joined: 30 Apr 2002 Posts: 6699 Location: under a rock at times...
Ive tried everything physical to get a spacer thats close to the hanger wall itself off\out..but no luck..any suggestions?thanks

_________________
Bend up and smell my anal vapor, your face is my toilet paper!!
View user's profile Send private message Send e-mail
Indy2992
Posted: Wed Jan 09, 2019 10:20 pm Reply with quote
ORDER OF THE SKULL ORDER OF THE SKULL
Joined: 22 Apr 2004 Posts: 1684 Location: That empty pool off La Tuna Canyon
A bearing spacer or a speed ring? I’ve soaked speed rings in oil and used a razor blade with success.
View user's profile Send private message Send e-mail
radrob
Posted: Thu Jan 10, 2019 2:36 am Reply with quote
ORDER OF THE SKULL ORDER OF THE SKULL
Joined: 30 Apr 2002 Posts: 6699 Location: under a rock at times...
Indy2992 wrote:
A bearing spacer or a speed ring? I’ve soaked speed rings in oil and used a razor blade with success.


I believe both..one truck hanger joined with a speed ring and either a spacer or inner circle of a bearing..cages/balls(tee hee)removed...

_________________
Bend up and smell my anal vapor, your face is my toilet paper!!
View user's profile Send private message Send e-mail
San Diego Oldschooler
Posted: Thu Jan 10, 2019 7:28 pm Reply with quote
Joined: 03 Oct 2003 Posts: 2819 Location: Down South in San Diego
Clamp on the spacer in a vice, put an axle nut on the end of the axle to protect it & then hit the axle end with a hammer. Hopefully this will dislodge the spacer.

SDO

_________________
Rainskates So Cal Rep & Product Development
View user's profile Send private message Send e-mail
gheepup
Posted: Thu Jan 10, 2019 11:29 pm Reply with quote
Joined: 24 Dec 2008 Posts: 264 Location: ???????
You can try a couple or a few drops of penetrating oil like Kroil or PB Blaster. Let it soak in for awhile to loosen things up. Eventually you should be able to dislodged whatever is stuck by prying with a utility knife blade. I like to try this before I break out the hammer.
View user's profile Send private message
charlieee
Posted: Tue Jan 22, 2019 2:09 am Reply with quote
ORDER OF THE SKULL ORDER OF THE SKULL
Joined: 08 Dec 2007 Posts: 669 Location: Tootgarook.....Australia.
Put it in the freezer over night.

Then tap it lightly.......

Metal shrinks , but becomes brittle.

Don’t bash it......your trucks may disintegrate.
View user's profile Send private message
 
Post new topic   Reply to topic
Page 1 of 1    
All times are GMT - 5 Hours
The time now is Mon Oct 14, 2019 11:52 pm
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum