SkullandBonesSkateboards.com Forum Index » DOWNHILL / SPEEDBOARDING / LONGBOARDS » Randall 180s |
Page 1 of 1 |
|
Author |
Message |
mikedwalrus |
Posted: Wed Dec 27, 2006 1:46 pm |
|
|
Joined: 05 Jul 2004
Posts: 226
Location: New Smyrna Bch, FL
|
I just picked up a new longboard (sector 9, 46" bamboo) and it came with some Randall 180s (R11 with the yellow bushings). I'm just rolling around with it, small hills (FL), parking lots, etc. I like to ride my trucks loose, but I had to tighten them up a little to prevent severe wheel bite. Three out of the four stock bushings split (washers bit into them pretty bad, then split). This is my first set of randalls, but from what I heard from others the stock bushings are supposed to be pretty decent.
I put some yellow Khiros in there for now (but I'm not sure I really like them). Can anybody recommend a good replacement bushing for these or should I just try another set of the Randall yellows? |
|
|
Back to top |
|
|
Christophish |
Posted: Wed Dec 27, 2006 5:22 pm |
|
|
Joined: 17 Feb 2003
Posts: 972
Location: Strathmore, AB
|
Khiros are good (I'd put in reds or blues, or a combo of the 2), as are Bones Yellows or blues, depending on what you weigh, I'm 220. Only thing is you need to stack some wahsers on the bottom so your bottom bushing is the same height as the original Randal bushing, or the truck's geometry will be fucked.
I had the same problem with my Randal bushings years ago. Are yours the yellow ones? If so try the reds (they come in the 150's), I've heard they are better. Bones or Khiros with washers are prolly your best bet though. |
|
|
Back to top |
|
dreadyboy |
Posted: Thu Dec 28, 2006 2:50 am |
|
|
Joined: 21 Dec 2006
Posts: 73
Location: belgium
|
the yellow stock bushing are the bomb, the problem isn't the bushings, but the bushing cups that are way to small for those bushings, myself i prefer the yellows over the red ones, and as a replacement bushing i would recommend the blue khiro's, or even the white's maybe, but those are really extremely soft, and change your bushings cups or you will have the same problem again |
_________________ life is going downhill indeed |
|
Back to top |
|
|
mikedwalrus |
Posted: Thu Dec 28, 2006 8:57 am |
|
|
Joined: 05 Jul 2004
Posts: 226
Location: New Smyrna Bch, FL
|
Right on, thanks for the info. As soon as I can locate them I'll get a set of new yellows & reds from Randal. I'll try them out again with some modified washers.
I can definitely tell a difference from the Randal's and the Khiro's. Not that the Khiros are bad they just don't feel as smooth and carvey as the Randal's (if that makes any sense).
Thanks again for the info.
mike |
|
|
Back to top |
|
macsdaddy |
Posted: Thu Dec 28, 2006 12:39 pm |
|
|
ORDER OF THE SKULL
Joined: 01 Jul 2003
Posts: 9754
Location: kansas city
|
Yeah, If MHM was still around he'd tell you to change out the washers to flat washers, and to upgrade the kingpin to grade 8. |
_________________
rightfootforward wrote: Nobody buys a chicks tits and then doesn't want to motorboat them. |
|
Back to top |
|
Slim |
Posted: Thu Dec 28, 2006 6:56 pm |
|
|
Joined: 06 Sep 2003
Posts: 2954
Location: pedro point, nor cal
|
Yep. Ditch the stock bushing washer cups - they have sharp edges that cut the bushings. Find some smooth ones or some flat washers. A lot of guys not only upgrade to grade 8 kingpins, they reverse the kingpins in the hanger.
The aftermarket Indy bushings work pretty good in Randal trucks, too. |
_________________ the pen is weak. skateboarding is as deadly as all hell - gonz |
|
Back to top |
|
|
atxJIMatx |
Posted: Sat Dec 30, 2006 10:40 am |
|
|
Joined: 20 Nov 2002
Posts: 1193
Location: Top Fuckin Ramen
|
I dig the soft indy Red Bushings in Randalls or a combo of the Indy red and some bones Hardcore soft.........
unless you can find some old Stimulators |
|
|
Back to top |
|
slob-air |
Posted: Sat Dec 30, 2006 11:19 am |
|
|
Site Admin
Joined: 27 Oct 2001
Posts: 63455
Location: S&B HQ
|
Ditch the whole truck altogether�get Crail, Holey, Bear, SGS, JimZ or some other pro level truck. Do you really want to go that fast on Randall junk? I don't.
If you stick with the Randall, absolutely replace the kingpin and reverse it. |
_________________ >>>>>Get your S&B Stickers here<<<<< |
|
Back to top |
|
dreadyboy |
Posted: Sat Dec 30, 2006 12:26 pm |
|
|
Joined: 21 Dec 2006
Posts: 73
Location: belgium
|
i have to agree on ditch the randall storry, but 'only' problem i ever had was that the trucks were finished horrible, asymmetric, and that the hanger bended, never had a kingpin problem
have holeys and force now, and especially the force trucks are simply astonishing |
_________________ life is going downhill indeed |
|
Back to top |
|
|
thugfrm87 |
Posted: Sat Dec 30, 2006 1:22 pm |
|
|
ORDER OF THE SKULL
Joined: 22 Apr 2005
Posts: 2653
Location: Canada
|
I use the black khiros on the back and the red khiros on the front. Havent changed the kingpins but will soon. I leave em really loose and they are great at speed. Just waiting on my hollys though. |
|
|
Back to top |
|
|